Polycarbonate Sheets in Pakistan — Imported, UV-Protected Roofing Sheets
Imported, UV-coated, 100% virgin polycarbonate roofing sheets — delivered nationwide from branches in Faisalabad, Lahore, Rawalpindi, Multan and Gujranwala. Get a free quotation today.
Head Office: P-26 Ravi Market, Susan Road, Faisalabad, Punjab
Key Takeaways
- United Enterprises supplies imported, UV-coated, 100% virgin polycarbonate roofing sheets across Pakistan, with branches in Faisalabad, Lahore, Rawalpindi, Multan and Gujranwala.
- Standard sheet size is 2.1 metre × 5.8 metre (approx. 7 ft × 19 ft), suitable for homes, factories, greenhouses, car parks and skylights.
- Price depends on thickness, sheet type (solid or multiwall), UV coating grade and order quantity — request a free quotation for an exact figure.
- Sheets carry a UV-protective coating that blocks harmful rays while letting daylight through, reducing indoor heat and electricity costs.
- Call 0300 8662013 or 0311 1000951 for delivery coordinated through your nearest branch — Faisalabad, Lahore, Rawalpindi, Multan or Gujranwala.
Executive Summary
Polycarbonate has become the standard roofing choice for transparent and semi-transparent structures across Pakistan — homes, factories, greenhouses, schools, and mosques alike — because it combines high light transmission with genuine impact and UV resistance, at a fraction of the weight of glass. This page is a complete buying and technical reference: what the sheets are made of, how solid compares to twin-wall, what drives price, how installation and maintenance work, and how to reach United Enterprises through its branches in Faisalabad, Lahore, Rawalpindi, Multan and Gujranwala. Read it end to end, or jump straight to the section you need from the contents below.
If you are searching for a way to buy polycarbonate sheets online in Pakistan, you have probably already compared a few local shops and found the same problem: unclear pricing, unclear sheet quality, and no straight answer about UV coating. Roofing decisions are hard to reverse once installed, and a wrong choice means a hot, brittle, yellowing roof within two summers.
United Enterprises supplies imported, UV-coated polycarbonate roofing sheets from its Faisalabad head office, with branches serving Lahore, Rawalpindi, Multan and Gujranwala. This guide explains exactly what the sheets are made of, where they work best, how much they cost to install, and how delivery across Pakistan works — so you can order with confidence.
What Is a Polycarbonate Sheet?
A polycarbonate sheet is a rigid, transparent panel made from an engineering-grade plastic polymer (polycarbonate resin), used as a lightweight, impact-resistant alternative to glass for roofing, skylights and glazing. It is manufactured either as a single solid layer or as a multiwall (twin-wall) panel with internal ribbed channels, and is typically finished with a UV-protective coating on the sun-facing side to slow down degradation from constant sun exposure.
In construction terms, polycarbonate sits in the same broad category as acrylic and fiberglass — transparent or translucent roofing and glazing materials — but it is generally the strongest and most weather-resistant of the three, which is why architects and civil engineers across Pakistan specify it for anything from a home skylight to a full factory roof.
How Polycarbonate Sheets Are Manufactured
Polycarbonate resin is produced from raw polymer pellets, which are melted and extruded through a die to form continuous flat sheets. For solid sheets, this produces one dense, uniform layer. For twin-wall and multiwall sheets, the extrusion die is shaped to form the internal ribs at the same time, creating the channel structure in a single continuous pass rather than gluing layers together afterward.
The UV-protective coating is applied through co-extrusion — a thin protective layer is fused onto the sun-facing surface while the sheet is still being formed, not sprayed on afterward. This is what makes genuine co-extruded UV protection far more durable than a surface-applied coating, which can wear off with cleaning over time. Quality depends heavily on whether the base resin is 100% virgin polycarbonate or a cheaper recycled blend — this is the single biggest factor separating long-lasting sheets from ones that yellow within a year or two.
Types of Polycarbonate Sheets
Not every polycarbonate sheet is built the same way. Here is what separates the main types you will come across when buying in Pakistan.
Solid Polycarbonate
A single dense layer offering maximum clarity and the highest raw impact strength. Best for high-visibility canopies and areas needing maximum see-through quality.
Twin-Wall Polycarbonate
Two layers joined by internal ribs, forming a single row of air channels. Lighter than solid, with mild insulation value. The most common choice for greenhouses and skylights.
Multiwall Polycarbonate
Three or more layers with multiple rows of internal channels, giving greater insulation than twin-wall at added weight. Used where thermal performance matters more than raw clarity.
Embossed Polycarbonate
A textured surface finish that diffuses light and reduces glare, while also concealing minor surface scratches better than a smooth finish.
Corrugated Polycarbonate
Formed into a wave or rib profile to match standard corrugated metal roofing, making it easy to combine with existing tin-sheet roofs for skylight strips.
Why Choose Polycarbonate Sheets?
Polycarbonate is an engineered polymer, not glass and not ordinary plastic. It is built for roofing because it combines three things that rarely come together in one material: it lets daylight through, it survives Punjab's harsh summers, and it weighs a fraction of glass or tin.
In the country's climate — long, intense summers with dust storms and occasional hailstorms — roofing sheets take a real beating. Tin sheets absorb heat and turn a room into an oven by midday. Ordinary plastic sheets go brittle and crack within one or two seasons. Polycarbonate roofing sheets are built to resist both problems at once, which is why they have become the default choice for car sheds, greenhouses and factory skylights across Punjab.
High Light Transmission
Sunlight passes through clearly, cutting the need for daytime electric lighting in sheds, warehouses and courtyards.
Impact Resistant
Far stronger than acrylic or glass of the same thickness, so it holds up against hail, thrown stones and wind-blown debris.
Lightweight Structure
Roughly one-sixth the weight of glass, which means lighter supporting frames and lower structural cost.
Benefits of Buying Roofing Sheets Online
Buying roofing sheets online instead of visiting three or four hardware markets across Pakistan saves a full day of driving and haggling. It also gives you something a shop counter rarely does: a written specification you can compare before you commit.
When you order polycarbonate sheets online through United Enterprises, you get a documented quotation covering sheet thickness, UV coating grade, and total sheet count for your roof area — not a verbal estimate that changes at delivery. You can also ask installation questions over the phone before the sheets even leave Faisalabad, so any custom cutting or bracket requirements are sorted out in advance.
The other advantage is stock consistency. Local retailers sometimes mix batches from different manufacturers on the same roof, which causes visible colour and clarity differences over time. Ordering directly means every sheet in your batch comes from the same import lot.
Product Features & Technical Specifications
Every United Polycarbonate sheet is manufactured from imported, A+ grade, 100% virgin polycarbonate resin — not recycled or blended material, which is a common shortcut among cheaper local sheets that causes premature yellowing.
| Specification | Detail |
|---|---|
| Material | 100% virgin polycarbonate resin, imported |
| Coating | UV protection coating (co-extruded, both faces available) |
| Sheet size | 2.1 m × 5.8 m (approx. 7 ft × 19 ft) |
| Optical clarity | High — suited to skylights and greenhouses |
| Light transmission | High, with reduced heat and glare versus clear glass |
| Weight | Lightweight versus glass or tin of equal coverage |
| Impact strength | High — resists hail and wind-blown debris |
| Expected service life | Long service life when installed and maintained correctly |
Exact thickness, sheet type (solid or multiwall/twin-wall) and colour tint are confirmed at the time of quotation based on your project. Ask our team for the current specification sheet.
Thickness & Lifespan Guide
Choosing the right thickness comes down to span, structure spacing and expected load — a wider unsupported span or a hail-prone area needs a thicker or more heavily ribbed sheet than a small courtyard skylight.
| Typical Use | General Guidance |
|---|---|
| Home skylight / small courtyard | Lighter solid sheet is usually sufficient over closely spaced framing |
| Car porch / parking shed | Mid-weight solid or twin-wall, depending on frame spacing and hail exposure |
| Greenhouse / nursery | Twin-wall preferred for the added insulation value |
| Factory / warehouse skylight strip | Heavier-grade sheet matched to truss spacing, confirmed with our team |
| Large-span commercial canopy | Thicker twin-wall or reinforced solid sheet with closer frame support |
On lifespan: genuine imported, UV-coated, virgin-resin polycarbonate is built for a long service life under Pakistan's sun when installed correctly. Cheaper recycled-blend sheets without proper UV coating commonly show yellowing and brittleness within one to two years — thickness alone does not fix a poor-quality resin. Ask our team to confirm the recommended thickness for your specific span before ordering.
Colour Guide
Colour is not just cosmetic — it changes how much heat and glare passes through:
- Clear: maximum light transmission, best where daylight matters most, such as greenhouses and factory skylights.
- Bronze / Grey (smoke tint): cuts glare and heat noticeably while still giving good visibility, popular for car porches and walkways.
- Opal / Milky white: diffuses light evenly and hides what is underneath, often chosen for skylights over bathrooms or storage areas.
- Green / Blue tint: a lighter heat-reduction option than bronze, sometimes used for commercial canopies for aesthetic reasons.
Common Installation Mistakes
- Fitting the sheet with the UV-coated face down, which exposes the untreated side to direct sun.
- Drilling fixing holes too tight, leaving no room for thermal expansion in Pakistan's heat.
- Spacing the supporting frame too widely for the sheet's thickness, causing sagging over time.
- Leaving multiwall channel ends unsealed, allowing dust and moisture to collect inside.
- Mixing sheets from different import batches on the same roof, causing a visible tint mismatch.
Applications Across Pakistan
Pakistan's mix of agricultural land, growing residential colonies and small industrial units means polycarbonate roofing sheets get used in more places than most buyers first expect.
Residential Uses
Homeowners in Pakistan fit polycarbonate sheets over courtyards, car porches and terrace skylights. The sheets bring in daylight without the glare and heat of a fully open roof, and they cut down on ceiling fan and light bulb use during the day.
Commercial Uses
Shops, showrooms and small plazas use polycarbonate for entrance canopies and atrium roofing, where a bright, naturally lit space attracts more footfall than a dim, tube-lit one.
Industrial Uses
Factories and warehouses in and around Pakistan use polycarbonate skylight strips inside metal-sheet roofs to bring daylight into large production floors, reducing daytime lighting costs across a whole shift.
Agricultural Uses
Given Pakistan's strong agricultural base, polycarbonate greenhouse panels are increasingly common for nurseries and off-season vegetable cultivation, since the UV coating protects both the crop and the sheet from constant sun exposure.
Industries We Serve in Pakistan
Beyond homes and shops, several institutional and specialised roofing jobs come up regularly across Pakistan. Here is how polycarbonate performs in each.
Farms & Nurseries
Twin-wall panels trap a thin air layer for mild insulation, keeping seedlings protected from both frost and harsh midday sun around Punjab's farmland.
Storage & Logistics
Skylight strips set into a metal-sheet warehouse roof cut daytime lighting costs without adding heat load, useful for cotton and grain storage sheds.
Playgrounds & Corridors
Bright, naturally lit corridors and covered play areas reduce electricity use during school hours while keeping students out of direct sun.
Waiting Areas & Walkways
Covered walkways between hospital blocks stay dry in the monsoon and bright during the day, which matters for patient movement between departments.
Production Floors
Industrial-grade sheets set into steel truss roofing bring even daylight across large factory floors in Punjab's textile and agro-processing hubs.
Courtyards & Entrances
Mosque courtyards and entrance canopies use polycarbonate to shade worshippers while keeping the space bright and open, not dark and enclosed.
Vehicle Protection
Car and motorcycle parking sheds use polycarbonate to block sun and rain without the heavy shadow of a solid tin roof.
Roof Openings
Small skylight cut-outs in an otherwise solid roof bring daylight into stairwells, kitchens and internal rooms that would otherwise stay dark.
Outdoor Living
Pergola roofing over sitting areas and shop-front canopies use tinted polycarbonate to soften direct sun while keeping the space open and airy.
Bulk Orders, Wholesale, and Contractor Support
Pakistan's roofing market has a steady mix of individual homeowners and larger buyers — contractors, builders and architects — who need different kinds of support from a supplier.
- Retail orders: Single-roof homeowner orders are quoted per sheet, with delivery scheduled through your nearest branch.
- Wholesale orders: Hardware shops and roofing dealers in Pakistan can set up a standing supply arrangement with tiered pricing.
- Bulk orders: Factory, warehouse and multi-unit housing projects qualify for bulk-order pricing based on total sheet count.
- Contractor discounts: Registered contractors working on repeat projects anywhere in Pakistan get preferential rates — ask our team to set up a contractor account.
- Architect support: Architects specifying polycarbonate glazing can request technical data sheets and sample cuts before finalising a design.
Call 0300 8662013 to discuss a bulk or wholesale order, or WhatsApp us through our WhatsApp channel for a fast response.
Why Imported Sheets Are Better
Not all polycarbonate sold in Pakistan is the same. Some local sheets are made from recycled or blended resin to cut cost, which shows up within a year or two as yellowing, cracking at the edges, and a drop in impact strength.
Imported, 100% virgin polycarbonate resin resists UV breakdown for much longer, holds its clarity, and keeps its impact strength through repeated heat-cool cycles — which matters in Pakistan, where roof surfaces can swing from cool nights to very hot afternoons within hours. United Enterprises sources imported sheet stock specifically to avoid the early failure that cheaper, unbranded sheets are known for.
UV Protection Benefits
Untreated plastic sheeting breaks down under constant sun exposure — the surface turns brittle, discoloured, and eventually cracks. UV-coated polycarbonate is built to stop this. A UV-resistant layer is fused onto the sun-facing surface during manufacturing, absorbing harmful ultraviolet rays before they reach the base polymer.
This coating does two jobs at once: it protects the sheet itself from degrading, and it reduces the amount of UV radiation passing into the covered space, which matters for anything stored, grown, or parked underneath — from vehicles and machinery to seedlings in a greenhouse.
Weather Resistance
Punjab's climate cycles between extremes: intense summer heat, monsoon downpours, dust storms, and occasional hail. Polycarbonate roofing sheets are engineered to handle this range without warping or cracking.
The material stays flexible enough to absorb impact from hail or wind-blown debris rather than shattering like glass or acrylic, and it does not rust or corrode the way tin sheeting does after repeated monsoon exposure. Combined with the UV coating, this makes polycarbonate one of the more weather-durable roofing choices available for open and semi-open structures in Pakistan.
Installation Guide
Measure the roof area
Calculate total coverage in square feet so the right number of 2.1m × 5.8m sheets can be quoted, including a small overlap allowance.
Prepare the frame
Sheets need a supporting frame of aluminium, steel or timber battens spaced according to sheet span, so the panel does not sag under its own weight or hail load.
Position sheets UV-side up
The UV-coated face must always face the sun. Installing it upside down cancels the protective benefit and shortens sheet life significantly.
Drill and fix correctly
Fixing holes should be slightly oversized to allow for thermal expansion in Pakistan's heat, using proper roofing screws with rubber washers to prevent water seepage.
Seal joints and edges
Use compatible flashing or sealant strips at overlaps and edges to keep out dust and rain, especially important ahead of the monsoon season.
For larger commercial or industrial installations, our team can advise on frame spacing and fixing patterns over the phone before your sheets are dispatched — call 0300 8662013 to discuss your project.
Maintenance Tips
Polycarbonate roofing needs very little upkeep, but a few habits extend its service life considerably in Pakistan's dusty, high-heat climate.
- Rinse with plain water and a soft cloth every few months to remove dust buildup, which otherwise blocks light transmission over time.
- Avoid abrasive cleaners, scrubbing pads, or solvent-based chemicals — they can strip the UV coating.
- Check fixing screws once a year, especially after monsoon season, and tighten any that have loosened from thermal expansion.
- Clear leaves, twigs, and debris from channel openings on multiwall sheets so trapped moisture does not encourage algae growth inside the channels.
- Inspect edge sealant annually and reapply if it has cracked or lifted.
Advantages & Disadvantages of Polycarbonate Roofing
No roofing material is right for every project. Here is a straight comparison so you can decide if polycarbonate genuinely fits your job.
- High light transmission with UV filtering
- Strong impact resistance versus glass or acrylic
- Lightweight, reducing frame and structural cost
- Long service life with genuine virgin resin
- Flexible enough for curved roof designs
- Costs more upfront than plain tin or PVC sheeting
- Cheaper, recycled-resin sheets degrade quickly if wrongly specified
- Surface can scratch if cleaned with abrasive tools
- Needs correctly spaced framing — poor installation shortens lifespan
- Not the best choice where full opacity or maximum insulation is required
Our recommendation, based on years of supplying roofing projects across Punjab: for anywhere you want natural daylight — homes, greenhouses, warehouses, skylights — genuine imported polycarbonate is worth the higher upfront cost. For fully enclosed, opaque storage areas where daylight is not needed, a standard metal roof may be more cost-effective, and we will tell you that honestly if you ask.
Price Factors
There is no single fixed price for polycarbonate sheets — the final cost depends on a handful of specific factors, which is why we quote per project rather than advertising one flat number.
Sheet Type
Solid polycarbonate, multiwall (twin-wall), and different thickness grades all carry different per-square-foot pricing.
UV Coating Grade
Single-side and double-side UV coating affect both durability and cost.
Order Quantity
Larger orders for full roofs or commercial projects typically get better per-sheet pricing than small custom cuts.
Delivery Distance
Delivery cost from your nearest branch is calculated separately from the sheet price based on quantity and route.
Custom Cutting
Non-standard sizes or curved installations may involve additional fabrication charges.
Installation Support
Guided or supervised installation, where required, is quoted as a separate line item.
The most accurate way to get a price for your Pakistan project is to share your roof size and intended use with our team — call 0300 8662013 or 0311 1000951 for a same-day quotation.
Why Buy from United Enterprises
United Enterprises operates from its head office at P-26 Ravi Market, Susan Road, Faisalabad, supplying polycarbonate roofing sheets through branches in Faisalabad, Lahore, Rawalpindi, Multan and Gujranwala, with nationwide delivery to every province in Pakistan.
Our sheets are imported and 100% virgin polycarbonate — not recycled blends — with UV coating confirmed on every batch. Because we deal directly in bulk import, we can offer competitive pricing on genuine material rather than the unbranded, short-lived sheets sometimes sold at lower upfront cost. Our team answers technical questions directly by phone, from thickness selection to frame spacing, before you place an order — not just after a problem shows up.
Browse our complete range on the Products page, or start with a call to talk through your specific roofing project.
Branch Locations & Delivery Across Pakistan
Orders are packed using covered transport suited to the 2.1m sheet length, to prevent flexing or edge damage in transit. Delivery is typically arranged within a few working days of quotation confirmation, depending on order size, route, and distance from your nearest branch.
Faisalabad
P-26 Ravi Market, Susan Road, Faisalabad, Punjab
Everywhere Else
Outside these five cities, we dispatch nationwide from the Faisalabad head office — call to confirm delivery to your area.
See the full Products page for current stock, or call 0300 8662013 to confirm delivery timing to your city.
Customer Support
Our team supports customers before, during and after the order — from helping estimate the correct sheet count for your roof, to answering installation questions, to after-sales help if you notice an issue with a delivered batch.
Reach support directly by phone at 0300 8662013, 0311 1000951, or landline 041 8710185. For a fast written response, message our WhatsApp channel. You can also follow project updates and installation videos on our Facebook page and YouTube channel, or catch quick product demonstrations on TikTok.
How Polycarbonate Compares to Other Roofing Materials
Buyers in Pakistan often shortlist polycarbonate against glass, acrylic, fiberglass, and PVC roofing before deciding. Here is how they compare on the factors that matter most for local weather conditions.
| Factor | Polycarbonate | Glass |
|---|---|---|
| Weight | Roughly one-sixth the weight of glass | Heavy — needs a stronger supporting frame |
| Breakage risk | Flexes under impact instead of shattering | Shatters into sharp pieces on impact |
| Installation cost | Lower frame and labour cost due to light weight | Higher — needs reinforced structural support |
| UV control | UV coating reduces harmful rays and glare | Passes UV through unless specially treated |
| Factor | Twin-Wall (Multiwall) Sheet | Solid Sheet |
|---|---|---|
| Structure | Two layers with internal ribbed channels | Single dense layer, no internal channels |
| Insulation | Trapped air adds mild thermal insulation | No air gap, less insulating value |
| Weight | Lighter per square foot | Heavier, but maximum clarity and strength |
| Best use case | Greenhouses, skylights, insulated roofing | High-impact areas, maximum see-through clarity |
| Factor | Polycarbonate | Acrylic Sheet |
|---|---|---|
| Impact strength | Very high — resists hail and debris | Lower — prone to cracking on impact |
| Heat resistance | Stable across wide temperature range | Can soften and warp in extreme heat |
| Weight | Lightweight | Slightly heavier for equal strength |
| UV durability | Long-lasting with UV coating | Yellows faster without added coating |
| Factor | Polycarbonate | Fiberglass Sheet |
|---|---|---|
| Transparency | High optical clarity, good for skylights | Translucent, not fully clear |
| Flexibility | Bends without cracking during install | More rigid, can crack on tight bends |
| Surface finish | Smooth, easy to clean | Textured, collects more dust |
| Factor | Polycarbonate | PVC Roofing |
|---|---|---|
| Light transmission | High, near-transparent options available | Mostly opaque, blocks daylight |
| Lifespan in direct sun | Long, with UV coating | Shorter, prone to brittleness over time |
| Best use case | Skylights, greenhouses, daylight roofing | Budget opaque roofing, low-light areas |
| Factor | Polycarbonate | Metal (Tin) Roofing |
|---|---|---|
| Natural light | Lets daylight through — reduces need for electric lighting | Fully opaque, no natural light |
| Heat build-up | UV coating and channel structure moderate heat | Absorbs heat quickly, radiates it indoors |
| Corrosion | Does not rust | Can rust or corrode after years of monsoon exposure |
| Best use case | Skylights, greenhouses, courtyards, daylight roofing | Fully enclosed storage where daylight is not needed |
Real Customer Scenarios
These are the kinds of projects our team works through every week — the details below reflect typical requirements and outcomes rather than one named customer, since every project's exact numbers differ.
Textile Warehouse Skylighting
A Faisalabad-area warehouse owner wanted to cut daytime lighting costs across a large production floor. We recommended skylight strips set at regular intervals into the existing metal-sheet roof, sized to the truss spacing. Result: even daylight across the floor without extra structural load.
Home Courtyard Renovation
A homeowner renovating a courtyard wanted natural light without full sun exposure. A solid, UV-coated sheet over a simple aluminium frame gave a bright, shaded sitting area at a fraction of the cost and weight of a glass roof.
Vegetable Nursery Greenhouse
A grower needed off-season protection for seedlings. Twin-wall panels were specified for their insulating air gap, moderating temperature swings between hot afternoons and cooler nights while still admitting the light young plants need.
Have a real project you'd like featured here with photos? Send details through our WhatsApp channel — genuine customer projects are always welcome.
Expert Tips
- Always ask which face is UV-coated before installation — fitting a sheet upside down cancels the protection and shortens its life dramatically.
- Order 5–10% extra on large roofs to allow for overlap and cutting waste, rather than ordering the exact calculated area.
- Don't over-tighten fixing screws — polycarbonate expands and contracts with heat, and holes should be slightly oversized to allow for this movement.
- Match sheet colour across a single roof — mixing batches from different import lots can show a visible tint difference in direct sunlight.
- For greenhouses, choose twin-wall over solid — the insulation value pays for itself in more stable growing conditions.
Ready to compare prices for your roofing project?
Get a written quotation before you decide — no obligation, no pressure.
Call 0300 8662013 NowSuggested Photos & Videos
When this page is published in WordPress, add real project photography using the ALT text suggestions below for image SEO. This keeps the page consistent with existing product photography already on the site.
| File Name | Alt Text | Title | Caption |
|---|---|---|---|
| polycarbonate-roofing-jhang-01.jpg | Polycarbonate roofing installed in Pakistan | Residential Polycarbonate Roof, Pakistan | A finished courtyard roof in Pakistan using UV-coated sheets. |
| industrial-warehouse-roofing-02.jpg | Industrial warehouse polycarbonate roofing | Warehouse Skylight Roofing | Daylight strips set into a warehouse roof near Pakistan. |
| greenhouse-sheet-installation-03.jpg | Greenhouse polycarbonate sheet installation | Greenhouse Panel Fitting | Twin-wall panels being fitted on a nursery frame. |
| car-parking-shade-04.jpg | Car parking shade with polycarbonate roof | Parking Shed Roofing | A completed car shed roof using solid polycarbonate. |
| residential-skylight-panel-05.jpg | Residential skylight polycarbonate panel | Home Skylight Installation | A skylight cut into a home roof for daytime light. |
| commercial-roofing-project-06.jpg | Commercial building polycarbonate roofing project | Commercial Roofing, Pakistan | An entrance canopy for a Pakistan retail plaza. |
| uv-coated-sheet-closeup-07.jpg | UV-coated polycarbonate sheet close-up | UV Coating Detail | Close-up of the UV-protective surface layer. |
| sheet-installation-process-08.jpg | Polycarbonate sheet installation process | Installation In Progress | Fixing screws and washers being applied to a sheet. |
| imported-sheet-stack-09.jpg | Imported polycarbonate roofing sheet stack | Imported Sheet Stock | Stacked 2.1m x 5.8m sheets ready for dispatch. |
| transparent-roofing-system-10.jpg | Transparent polycarbonate roofing system | Transparent Roof System | A fully transparent roof over a sitting area. |
| factory-skylight-roof-11.jpg | Factory roof with polycarbonate skylights | Factory Skylight Roofing | Skylight strips across a Pakistan factory production floor. |
| agricultural-shed-roofing-12.jpg | Agricultural shed polycarbonate roofing | Farm Shed Roofing | A farm storage shed roofed with UV-coated sheets. |
| school-canopy-sheet-13.jpg | School canopy polycarbonate sheet | School Corridor Canopy | A covered corridor canopy at a Pakistan school. |
| mosque-entrance-shade-14.jpg | Mosque entrance shade polycarbonate roof | Mosque Courtyard Shade | A shaded courtyard entrance at a local mosque. |
| retail-showroom-roofing-15.jpg | Retail showroom polycarbonate roofing | Showroom Roofing, Pakistan | A bright, naturally lit retail showroom roof. |
Description guidance: name the city, the application (roofing/shed/skylight), and the sheet type in every file name and alt tag, matching the pattern above, for consistent image SEO across all city pages.
Product Overview
Full walkthrough of sheet specifications and finish.
YouTubeInstallation Guide
Step-by-step fixing and sealing demonstration.
FacebookUV Protection Demonstration
Side-by-side coated vs uncoated exposure test.
FacebookCustomer Testimonials
Feedback from recent Punjab installations.
TikTokWarehouse Project Walkthrough
Short-form clip of a completed industrial roof.
WhatsApp ChannelOrder Updates & New Stock
Join for delivery updates and stock alerts.
Frequently Asked Questions
What is the price of polycarbonate sheets in Pakistan?
Does United Enterprises deliver polycarbonate sheets across Pakistan?
How long does delivery take?
Is installation included with the sheets?
What sheet sizes are available?
Do the sheets come with UV coating?
How long do polycarbonate roofing sheets last?
Are the sheets suitable for greenhouses?
Can polycarbonate sheets handle hailstorms?
What is the difference between solid and multiwall (twin-wall) sheets?
How much heat do polycarbonate sheets block?
Can I get a custom order for an unusual roof shape?
Are polycarbonate sheets good for residential courtyards?
Do you supply polycarbonate sheets for factories and warehouses?
Do you offer bulk, wholesale, or contractor pricing?
How do I place an order online?
Final Buying Guide
Before you buy polycarbonate sheets anywhere in Pakistan, confirm four things with your supplier: whether the resin is imported virgin material or a recycled blend, whether UV coating is applied and to which face, the exact sheet size and quantity for your roof area, and the total delivered price in writing.
United Enterprises can confirm all four in a single phone call, with delivery arranged through your nearest branch or directly from our Faisalabad head office. Compare our specification sheet against any other quotation you receive — the difference usually shows up within the first hot season.
Written With Field Experience From United Enterprises
This guide was prepared by the United Enterprises product and customer support team, based at P-26 Ravi Market, Susan Road, Faisalabad. The team works directly with homeowners, contractors, architects, and factory owners across Pakistan — through branches in Faisalabad, Lahore, Rawalpindi, Multan and Gujranwala — sourcing imported polycarbonate sheet stock and advising on installation for residential, commercial, industrial and agricultural roofing projects.
Every technical recommendation on this page, from UV-side orientation to frame spacing, reflects installation guidance given to real customers over the phone, not generic manufacturer copy. For project-specific advice, call 0300 8662013 or visit our Products page to see current stock.
Buy Polycarbonate Sheets Online in Pakistan — Talk to United Enterprises Today
Imported, UV-coated, 100% virgin polycarbonate roofing sheets, delivered nationwide across Pakistan. Request a quotation, compare sheet options, or ask an installation question — our team answers directly by phone.
Phone: 0300 8662013 | 0311 1000951 | Landline: 041 8710185
Serving Faisalabad, Lahore, Rawalpindi, Multan, Gujranwala & all of Pakistan
